How to maintain a punching machine?

When decorating our homes, we all need to use punching machines. In addition to decoration, in daily life, if we need to do some wall decoration, we need to use punching machines. How to use a punching machine, how to use it correctly, and how to maintain it need everyone to understand. It is also a good choice to keep a small punching machine at home. Whether it is a construction site or a household, it is necessary to understand these issues and take a look together.

How to use a punching machine?

1、 Operation method and precautions for punching machine:

1. Select punching holes and dies that match the required aperture. Installed on the main module head;

2. Insert the workpiece into the die head, the opening, align it with the marking line, and rotate the punching die to clamp it;

3. Shake the handle and press down on the punch to punch out the hole.

2、 Notes:

1. Before operation, check whether the punch and die are matched properly, otherwise it will damage the host;

2. Before punching, the punching die must first be rotated and compressed;

3. If any abnormal faults are found during the operation, the punching should be stopped immediately to eliminate the fault, in order to avoid damaging the machine parts;

4. The screw and nut should be lubricated with oil regularly.

3、 Instructions for using desktop manual punching machine:

1. Stack the files that need to be organized neatly;

2. Pull out the positioning ruler of the punching machine and determine the punching position;

3. Insert the file that needs to be punched (the number of punched pages should not exceed the specified number), align it, and press down on the punching machine handle;

4. After releasing the hand, the handle of the punching machine automatically rebounds and takes out the file that has been punched;

5. Collaborate with hardware or plastic binding clips to bind perforated documents.

4、 Summary

1. First of all, we need to know that the use and maintenance of a punch are tailored to different types of punches. For the hole diameter of the wooden plug and hole plug in the punch, it is mainly determined by the inner diameter of the hole. Before punching, we need to select the hole tube according to the requirements of the hole diameter to ensure that the specifications are correct.

2. Secondly, after using the punch, we need to apply butter or Vaseline to the cutting edge and place the punch in a well ventilated and dry place. This way, the punch will not come into direct contact with acids, alkalis, and other substances.

3. Finally, we need to know that after long-term use of the punch, the edge of the punch will gradually become dull. We can use a mixed file to make it sharper.

How to use a punching machine and the correct usage method can shorten the construction time and meet the decoration needs of the home faster. And the correct usage can increase the lifespan of the punching machine. The question of how to maintain a punching machine is also a common common common knowledge. After understanding it, everyone should use it in their daily lives so that they can use and maintain the punching machine correctly. I hope these little tips can be helpful to you.